MODEL NUMBER: MV5-X450W
| Power supply | 380-415V/3Ph/50Hz | |
| Cooling | Capacity | 45KW |
| Input Power | 12.8KW | |
| EER | 3.52W/W | |
| Heating | Capacity | 50KW |
| Input Power | 13.35KW | |
| COP | 3.75W/W | |
| Connectable indoor unit | ||
| Total capacity | 50~130% of outdoor unit capacity | |
| Max. quantity | 30 | |
| Compressor | ||
| Type | DC inverter | |
| Model | E405DHD-42D2YGE | |
| Brand | Hitachi | |
| Quantity | 2 | |
| Crankcase heater | 27.6×4W | |
| Refrigerant oil type | FVC68D | |
| Refrigerant oil | 500ml×2 | |
| Fan motor | ||
| Type | DC motor | |
| Model | WZDK750-38G-4 | |
| Brand | Panasonic/Nidec | |
| Quantity | 2 | |
| Insulation class | E | |
| Safe class | IP23 | |
| Input | 400+350W | |
| Output | 290+230W | |
| Static pressure Pa | 0-20 (default)Pa | |
| Static pressure Pa | 20-60 (customized)Pa | |
| Fan | ||
| Material | Plastic | |
| Type | Axial | |
| Quantity | 2 | |
| Outdoor | ||
| Number of rows | 2 | |
| Tube pitch(a) ×row pitch(b) | 22×19mm | |
| Fin spacing | 1.6mm | |
| Fin type | Hydrophilic aluminum | |
| Tube outside diameter | Ф8mm | |
| Tube type | Inner-grooved | |
| Coil length × height | 2320×1232mm | |
| Number of circuits | 22 | |
| Refrigerant | ||
| Type | R410A | |
| Factory charging | 13Kg | |
| Pipe connections | ||
| Liquid pipe | Φ15.9mm | |
| Gas pipe | Φ25.4mm | |
| Oil balance pipe | Φ8mm | |
| Design pressure(High/low) | 4.4/2.6MPa | |
| Air flow rate | 14000m3/h | |
| Sound pressure level | 62dB(A) | |
| Net dimension (W×H×D) | 1340×1635×790mm | |
| Packing size (W×H×D) | 1405×1805×855mm | |
| Net weight | 333Kg | |
| Gross weight | 351Kg | |
| Operating temperature range | Cooling: -5~48℃; Heating: -20~24℃ | |
All rights reserved to Santra Enterprises Limited, New Zealand
Powered by DataGenius