MODEL NUMBER: MDV-V200W
| Power supply | 380-415V/3Ph/50Hz | |
| Cooling | Capacity | 20KW |
| Input Power | 6.1KW | |
| EER | 3.28W/W | |
| Heating | Capacity | 22KW |
| Input Power | 6.1KW | |
| COP | 3.61W/W | Compressor |
| Model | LNB42FSAMC | |
| Type | Rotary | |
| Brand | MITSUBISHI | |
| Quantity | 1 | |
| Capacity | 13.98KW | |
| Input | 4.27KW | |
| Crankcase heater | 25W | |
| Refrigerant oil type | FV50S | |
| Refrigerant oil | 1400+1300ml | |
| Outdoor Fan motor | ||
| Model | WZDK170-38G-1 | |
| Type | DC motor | |
| Quantity | 2 | |
| Brand | Panasonic | |
| Insulation class | E | |
| Safe class | IP×4 | |
| Input | 260W(up)/200W(down) | |
| Output | 210W(up)/160W(down) | |
| Rated current | 2.1A(up)/1.7(Adown) | |
| Outdoor fan | ||
| Material | ASG20 | |
| Type | Axial fan | |
| Quantity | 2mm | |
| Diameter | 560mm | |
| Height | 170mm | |
| Outdoor | ||
| Number of rows | 1.6 | |
| Tube pitch(a) ×row pitch(b) | 22x19.04mm | |
| Fin spacing | 1.5mm | |
| Fin type | Hydrophilic fin | |
| Tube outside diameter | Ф7mm | |
| Tube type | Inner groove tube | |
| Coil length × height | 1090×756mm | |
| Number of circuits | 12 | |
| Air flow rate | 10999m3/h | |
| Sound pressure level | 59dB(A) | |
| Connectable indoor unit | ||
| Total capacity | 50-130% | |
| Max. quantity | 10 | |
| Outdoor uint | ||
| Net dimension (W×H×D) | 1120×1558×528mm | |
| Packing (W×H×D) | 1270×1720×565mm | |
| Net/Gross weight | 137/153mm | |
| Refrigerant | ||
| Type | R410A | |
| Factory charging | 4.8Kg | |
| Throttle type | Electronic expansion valve | |
| Design pressure(High/low) | 4.4/2.6MPa | |
| Refrigerant piping | ||
| Liquid pipe | Ф9.53mm | |
| Gas pipe | Ф19.1mm | |
| Ambient temp. range | ||
| Cooling | -15~24oC | |
| Heating | -15~24oC | |
All rights reserved to Santra Enterprises Limited, New Zealand
Powered by DataGenius